Drywall Repair in Meridian, Idaho

Meridian Quality Drywall is the drywall repair page for Meridian, Idaho. Repair means fixing existing gypsum: holes, cracks, fastener pops, and failed tape, then matching knockdown or orange peel. It is not a full-room hang unless the board is finished.

The common Meridian failures are fastener pops on 15-year-old production homes, corner-bead dings in hallways, hairline cracks at vaulted-ceiling peaks after a hard freeze, and water stains under bathrooms after a supply line drip. Each one has a different repair. Treating them all as "spackle" is how you still see the patch after paint.

How are holes, cracks, and fastener pops repaired?

A clean hole with the paper intact can take a patch. A ragged hole needs a square cut-back to solid board and a backer. Cracks that follow a joint are usually tape failure. Cracks that run through the field of a sheet are movement: truss uplift on a vault, or settlement on fill in south Meridian. Those get a flexible approach or they come back the next winter.

Fastener pops are screws that were overdriven or wood that dried and pulled. The fix is to add a new screw an inch away, dimple the old one, and finish. Driving the popped screw back in just pops it again.

Water damage is a cut-out

A brown stain with firm board can be sealed and painted. Soft board, a musty smell, or a stain that keeps returning means the wet gypsum comes out to the next dry stud bay, the cavity dries, and new board goes in. Moisture-resistant board replaces regular board in any bath or laundry repair. Guessing at the leak and mudding over it is a second call.

Texture match is the last step. Most Meridian interiors are knockdown or light orange peel. The patch has to be textured a shade heavier than the field, then knocked down, or it flashes under raking light from the big windows these houses are built with. Call with the size of the damage and the room.