New Construction Drywall in Meridian, Idaho

Meridian Quality Drywall hangs new construction drywall in Meridian on production plats and custom houses after rough-in. This is a whole-house hang, tape, texture, and punch. It is not a single-room remodel. South of I-84 the volume is production knockdown. North of McMillan the jobs add trays and taller plates.

Call (208) 382-8431 with the square footage, ceiling heights, and whether the spec is production Level 4 or mixed with Level 5.

New Construction Drywall Options for Meridian Properties

Production hang, Level 4 plus knockdown

The south Meridian spec. Half-inch interiors, Type X garage planes, MR in baths, knockdown on the field. Speed comes from a straight hang, not from skipping coats.

Custom hang with trays and tall plates

Eagle and Hidden Springs plates at 10 feet, trays, radius walls. More bead, more cuts, more time. We set trays first. Knockdown in a 12-foot foyer is a finish you should own.

Garage and bonus-room rated work

Type X on the garage ceiling and the house wall, taped, in the same sequence as the rest of the house. Bonus rooms get a living-space finish after that plane is closed.

Punch after framing dries

Fastener pops as green lumber dries. Trim hits. We walk the house after the other trades and coat what they opened. A new house without punch is not a finished hang.

How We Handle New Construction Drywall in Meridian

1. Walk framing. Bowed studs, missing backing, and joist direction get named before the first sheet.
2. Hang lids, then walls. Type X and MR in the right rooms. Tight box cuts.
3. Tape in setting compound. Coat. Sand. Texture to the spec.
4. Heat or shade as the season requires. We do not finish a frozen shell or a 110 F garage-stored pile of board.
5. Punch after flooring and trim. Final raking-light walk.

Materials and Methods

ASTM C1396 in 1/2-inch and 5/8-inch Type X. Moisture-resistant panels in wet rooms. Cement board in showers. Paper tape. Setting-type mud on the tape coat. Ready-mix for fill and finish. Corner bead. Hopper and knockdown knife. Drywall lifts. Screw guns. GA-216 and GA-214. IRC garage separation. 4x8 and 4x12 sheets. Board stored flat, inside, off a hot garage floor. That last point is a Meridian summer issue, not a slogan.

South of I-84 the sequence is production: hang, tape, knockdown, punch. North of McMillan the sequence adds trays and a Level 5 conversation in the main rooms. We walk the plans before we stock board so Type X, MR, and regular land in the right rooms.

Punch is not optional on a house we hung. Trim carpenters nick beads. Flooring crews tear tape at the base. We come back. A new house that never gets punch is leftover damage after move-in, not a finished hang.

What New Construction Drywall Costs in Meridian

Fixr's national hang-and-finish band is one-fifty through three-fifty per square foot, with whole-house jobs often quoted as a package. HomeAdvisor notes many 2,000-square-foot houses landing between 8,000 and 30,000 dollars for drywall, depending on finish and height. Angi groups typical installs between a dollar and a half and three dollars per square foot. Trays, Type X, Level 5 rooms, and winter heat move a Meridian new-construction quote. We quote the house. We do not paste a published band on your plans.

We stock Type X, MR, and regular in the rooms that need them so a helper does not grab the wrong sheet for a garage lid. The wrong sheet in a rated plane is a tear-out. A color of face paper is not enough. We read the stamp.

Trade stacking on a fast south Meridian plat means we may hang a house in two moves: main hang, then punch after trim. We plan that. A single move that leaves torn tape at every doorway is not faster. It is a longer punch.

We keep a room-by-room board list on custom houses so Firecode, purple, and white do not get swapped. A swapped sheet is a tear-out if it lands on a rated plane. That list is part of the hang, not paperwork for its own sake.

We photograph bowed walls and missing backing before we hang so the builder sees the framing notes. Hanging over a known bow without a shim is a wave we would own. The photo is the note. Then we shim or we wait on the framer.

New Construction Drywall Questions

When do you hang a new Meridian house?

After mechanical, electrical, and plumbing inspections have cleared and insulation is in if the sequence calls for it. Hanging over uninspected rough-in is how board comes back out.

Production hang or custom hang?

South Meridian plats are a production Level 4 plus knockdown. Custom homes add trays, tall plates, and often Level 5 in the main rooms. We quote those as different hangs.

Who handles punch after other trades?

We do. Flooring, trim, and mechanicals nick corners and tear tape. Punch is part of a new-construction hang, not a surprise extra on a house we finished.

Does the house need heat before finish?

Yes in winter. A cold shell in January will check the finish. We need heat in the rooms we are coating. Summer is the opposite problem: mud skins too fast.

Call (208) 382-8431 with the plan set or the square footage to quote a new hang.